Whirlpool W11087376 Dishwasher Pump & Motor Assembly

Step 1: The power source to the dishwasher should be disconnected. It should ensure that your dishwasher is unplugged from the wall outlet before any repair tasks are initiated.

Step 2: The upper screws from the dishwasher cover should be removed, then the cover should be elevated to access the internal components of the appliance.

Step 3: The pump and motor assembly should be located. This is generally situated at the bottom of the dishwasher adjacent to the drain hose.

Step 4: All hoses and electrical connections linked to the motor should be detached.

Step 5: A screwdriver should be employed to extract the mounting screws that secure the motor.

Step 6: Once the screws are taken out, the motor assembly should be gently withdrawn from the dishwasher and placed aside.

Step 7: Your new pump and motor assembly should be taken and carefully inserted into the area left by the previous motor.

Step 8: All hoses and wiring should be reattached to the new motor.

Step 9: The motor should be fastened in position using the screws that were previously removed. It should be confirmed that the screws are securely tightened.

Step 10: The dishwasher cover should be reinstalled and fastened with the upper screws.

Step 11: The dishwasher should be reconnected to power and the power supply should be switched on.

Your replacement of the Whirlpool dishwasher pump and motor assembly is now finished. Your repaired dishwasher can now be enjoyed once more.

Please remember, these instructions serve as general guidance and should always be utilized alongside the manufacturer's manual, if accessible.