Toggle Nav
Search
  • 0 My Cart
Toggle Nav
main product photo

LG MDS62050802 Dryer Door Gasket

Be the first to review this product
Special Price $66.62 Regular Price $82.95
In stock
Available Quantity:   12
SKU
MDS62050802

Product Description

The LG MDS62050802 Dryer Door Gasket is used to seal the door opening in order to assist in containing air and heat in the appliance drum during use. It works by pressing on the door frame when it is closed to form a barrier that limits the heat loss and used to prevent lint and debris from escaping the cabinet. The gasket is placed on the edge of the door opening and fits into the special groove on the front panel of the dryer.
Add to Wish List
Dryer Parts, Dryer Door Seal,
19.3"X14.6"X2.7"
Manufacturer
✓ This Product Replaces: MDS62050801
https://www.hnkparts.com/media/catalog/product/m/d/mds62050802-70486.jpg

This Part Fits the Following Models (6)

Write Your Own Review
You're reviewing:LG MDS62050802 Dryer Door Gasket
Your Rating
FAQS
Customer Questions
What maintenance is required for the LG MDS62050802 Door Gasket?

Regularly inspect the dryer gasket for cracks, tears, or warping to ensure a proper seal. Clean it gently with a damp cloth to remove lint, detergent residue, and debris. Proper maintenance supports prevent air leaks, improves drying efficiency, and reduces pressure on the dryer components.

What are common issues with the LG MDS62050802 Door Gasket?

  • Air leaks are causing longer dryer times.
  • Visible cracks, tears, or deformation in the gasket.
  • Poor door sealing leading to heat loss.
  • Accumulation of lint or debris around the seal.
  • Moisture escaping and causing condensation near the door.

Installation Steps

Step1: Unplug dryer and shut off power; if gas model, close gas valve.

Step2: Open door and remove inner door panel screws carefully.

Step3: Peel old gasket and clean groove thoroughly to remove lint and residue.

Step4: Align new gasket and press evenly around frame.

Step5: Reassemble door panel and tighten screws securely.

Step6: Run test cycle and check for proper seal and airflow.