The LG 5001EL2001H Dryer 24" Stacking Kit with Brackets is intended to enable the stacking of a dryer on a washer in a safe manner. The kit also consists of brackets and a support frame that is used to hold the units in place. This stacking kit is beneficial in that it is used to save space in small areas such as in the laundry area, where it is designed to provide vertical storage. It also enhances accessibility and efficiency and also makes sure that both appliances are not unstable during use.
Step 1: The old dryer is disconnected from the electrical source and taken away from the wall. The dryer may be drawn outward using a screwdriver to detach the bracket securing it.
Step 2: The power cord and the exhaust duct are detached from the rear of the dryer. Your dryer’s installation manual should be consulted for assistance with disconnecting these elements, if needed.
Step 3: The new LG Dryer 24 Inch Stacking Kit is gently elevated against the wall and fastened using the screws included.
Step 4: The power cord and the exhaust duct are attached to the rear of the new LG Dryer. Your user manual should be consulted for more comprehensive guidance.
Step 5: The old dryer is positioned onto the new LG Dryer 24 Inch Stacking Kit. It is ensured that the supplied screws and levelers are utilized to secure the dryer firmly.
Step 6: The dryer is reconnected to the wall outlet and it is verified that the dryer operates correctly.
Please remember that these instructions are served as general guidance and should always be referenced alongside the manufacturer’s manual, if it is available.
